Home » Shop » Boxes and Covers

Showing 1–12 of 37 results

Show sidebar

1-Gang 18 cu. in. Blue PVC New Work Electrical Switch and Outlet Box

$0.49

1-Gang 18 cu. in. Blue PVC New Work Electrical Switch and Outlet Box

Legrand isopod boxes square measure made from sturdy thermoplastic. They feature rear and aspect stabilizers to keep up device rigidity and minimize flat solid bow and injury. They additionally feature height sight, bracket countersink and box levellers.
  • Durable, impact-resistant thermoplastic box
  • Threaded mounting holes
  • Auto/clamps eliminate the requirementfor separate cable clamps
  • Easy installation, rectangular cut-out
  • 18 cu. in. capacity
  • CSA Listed UL listed

1-Gang 19 cu. in. Type-FSC FS Box

$11.11

1-Gang 19 cu. in. Type-FSC FS Box

The 2-Gang thirty two metal. in. Type-2FSE FS Box is intended to require commonplace covers and accessories. it's created with non-corrosive PVC and is employed for through terminations wherever two devices or further wiring capability is needed. The box has integral mounting feet for easier installation and is fireplace rated and CSA and UL Listed for safety.
  • For through terminations wherever two devices or further wiring capability is required
  • Non-corrosive PVC construction
  • Takes commonplace covers and accessories
  • Integral mounting feet for easier installation

1-Gang 20 cu. in Electrical Ceiling Box with Captive Nails

$1.57
The Carlon nothing Box Blue 1-Gang eighteen conductor. In. Non-Metallic Ceiling Box is intended to be used with non-metallic sheathed cable in accordance with Article 314 of the National electrical Code. This cable is nice for residential and lightweight business applications, the box is created with polycarbonate, is listed to be used with masonry walls and may be used with 90° C-conductors.  
  • It meets NEMA OS-2 and is fireplacerated and UL listed for safety.
  • Use to support fixtures up to fifty
  • Not meantfor fan support
  • Thermoplastic construction resists rust and will notconduct electricity
  • Installs with captive nails, ground lug and screw (included)
  • Built-in cable clamps hold wires firmly in situation
  • UL listed

1-Gang Blank FS Box Cover (Case of 12)

$36.12
The 1-Gang Non-Metallic Blank FS cowl is intended to be used with 1-Gang FS boxes. it's created with weatherproof PVC and comes with a seal and stainless-steel mounting screws. the duvet is UL listed.
  • Fits 1-Gang FS boxes
  • Durable PVC construction won't rust or corrode
  • Includes stainless-steel mounting screws and seal
  • Comes with stainless-steel mounting screws and a seal
  • UL listed

1-Gang Floor Box Cover Duplex Receptacle (Case of 10)

$165.00

1-Gang Floor Box Cover

The 1-Gang Non-Metallic Duplex Cover is designed for use with round floor boxes. It is made with a high-impact thermoplastic material for durability and features 3/8 in. drill points for low-voltage cable pass-through. It is CSA and UL listed to help ensure safety.
  • For use with round floor boxes
  • For tile and carpet applications
  • High-impact thermoplastic construction
  • 3/8 in. drill points provided for low-voltage cable pass-through Approved for use on all finish flooring
  • UL scrub water tested

1-Gang Horizontal or Vertical Mount Weatherproof Extra Duty In-Use Cover/GFCI Combo

$33.98

1-Gang Horizontal

Vertical Mount Weatherproof Extra Duty In-Use Cover/GFCI Combo

Provides weatherproof protection once the associate outlet is in use. In-use covers area unit made of high-impact polycarbonate construction providing most sturdiness. Associate hooked up the seal, Self-Test GFCI, mounting hardware, and installation directions enclosed.  
  • Quick-fit hole mounting system permits cowl installation below a second
  • Self-test GFCI receptacle enclosed
  • Lockable tab (1/4 in. shackle)
  • 2-3/4 in. deep
  • additional Duty rated
  • NEMA 3R compliant
  • Used where weatherproof protection is required for a receptacle
  • Kit includes box, receptacle, & cover
  • Includes hooked up the seal and mounting hardware
Amps Supply is a wholesale distributor of electrical with capabilities, technologies, and employees to provide the innovative solutions you depend on. ♦Amp Supply

1-Gang Horizontal or Vertical Weatherproof Universal Device Flip Lid Covers

$4.90

1-Gang Horizontal

Vertical Weatherproof Universal Device Flip Lid Covers

BELL Weatherproof device covers give protection to an of doors receptacle or switch. Covers are made up of superior business quality formed metal. The premium powder coat end provides corrosion resistance. A gasket, mounting hardware, and directions are enclosed.  
  • Quick-Fit hole mounting system permits cowl installation below a moment
  • Pre-configured for GFCI with proprietary knock-out technology for alternate devices
  • Lockable tab
  • 12-in-1 configurations
  • Horizontal or vertical mount
  • NEMA 3R compliant
Amps Supply is a wholesale distributor of electrical with capabilities, technologies, and employees to provide the innovative solutions you depend on. ♦Amp Supply

18 cu. in. Blue Polycarbonate Round New Work Ceiling Electrical Box

$2.61

18 cu. in. Blue Polycarbonate Round New Work Ceiling Electrical Box

The nothing Box Blue 1-Gang eighteen atomic number 29. In. Non-Metallic Ceiling Box is intended to be used with non-metallic sheathed cable in accordance with article 314 of the NEC. Nice for residential and lightweight industrial applications, the box is created with Polycarbonate, is listed to be used with masonry walls and might be used with 90°C conductors.  
  • It meets NEMA OS-2 and is fireplacerated and UL listed for safety.
  • For use with fixtures up to fifty
  • Not supposedto be used with ceiling fan - not fan rated
  • Thermoplastic construction resists rust and will notconduct electricity
  • Built-in cable clamps hold wires firmly in situation
  • Captive nails enclosed
UL listed  

3-1/2 in. Deep Low Voltage Masonry Box Partition (20-Pack)

$214.92

3-1/2 in. Deep Low Voltage

Masonry Box Partition (20-Pack)

Low Voltage Partitions are wont to separate low-tension circuits from current-carrying electronic equipment. The partitions are to be used with masonry boxes. The partition slides in pre-punched slots within the box and is secured in situ by a raised device cowl.  
  • Steel construction provides stability and sturdiness
  • Pre-galvanized steel provides corrosion-resistance
  • Partition is intended to be used with 3-1/2 in. deep masonry boxes
  • 1-piece partition is intended for straightforward installation
  • Can be superimposed to divide power from voice/data
  • Used with three 1/2" deep masonry boxes
  • Easily slides in pre-punched slots within the box
Amps Supply is a wholesale distributor of electrical with capabilities, technologies, and employees to provide the innovative solutions you depend on. ♦Amp Supply

3-Gang Masonry Box, 2-1/2 in. Deep with 1/2 and 3/4 in Concentric KO’s (10-Pack)

$84.36

3-Gang Masonry Box

2-1/2 in. Deep with 1/2 and 3/4 in Concentric KO's (10-Pack)

  Manufactured from sturdy pre-galvanized steel. Designed to deal with and shield electrical wiring, switches, and receptacles in masonry walls. Acceptable to be used in 2-hour fireplace rated walls and ceilings. Knockouts for passage connectors and mounting holes are designed to resist suspension from coming into the box.  
  • The ground close to the front of the box for installation convenience
  • Rugged welded construction
  • normal 1/2 amd 3/4 homocentric KO's
  • 47.8 cu. in. capacity
  • Non-gangable
  • Designed for mounting switches or alternative devices in masonry walls
  • Used for four in. block walls
  • Knockouts are designed to resist suspension from coming into the box
Amps Supply is a wholesale distributor of electrical with capabilities, technologies, and employees to provide the innovative solutions you depend on. ♦Amp Supply

3’8”x2’8”x3′ Concrete Polymer Pull Box

$6,755.83
Stackable Box, Underground, (W) 32 Inch x (L) 44 Inch x (D) 44 Inch, Open Base, Precast Polymer Fiberglass Reinforced Concrete

3/4 in. 32 cu. in. Type-2FSE FS Box

$7.89

3/4 in. 32 cu. in. Type-2FSE FS Box

The 2-Gang thirty two metallic element. in. Type-2FSE FS Box is meant to require customary covers and accessories. it's created with non-corrosive PVC and is employed for through terminations wherever a pair of devices or extra wiring capability is needed. The box has integral mounting feet for easier installation and is hearth rated and CSA and UL Listed for safety.
  • For through terminations wherever a pair of devices or extra wiring capability is required
  • Non-corrosive PVC construction
  • Takes customary covers and accessories
  • CSA and UL listed and hearth rated to assist guarantee safety
  • Integral mounting feet for easier installation