Brake Motor: Totally Enclosed Fan-Cooled, 1 HP, 1,800 Nameplate RPM, 208-230/460V AC
Three-phase brake AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They require no capacitor, start winding, centrifugal switch, or other starting device that can wear out and fail. They are for use in applications that require rapid stopping and holding action.
$1,788.85
| Item : | Brake Motor |
| Motor Application : | Brake Motor |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 |
| Nameplate RPM : | 1,800 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 3.1-3.0/1 .50 |
| Frame : | 143T |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.25 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Rigid Base |
| Inverter Rated : | Yes |
| Inverter Rating : | 10:1 Variable Torque, 2:1 Constant Torque |
| Brake Rating : | 6 ft-lb |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 7/8 in |
| Shaft Length : | 2 1/4 in |
| Conduit Box Position : | F1 |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Length Less Shaft : | 15 3/16 in |
| Weight : | 35 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 85.5 % |
| CC Number : | CC030A |
| Standards : | CSA Certified, UL Recognized |
| Green Certification or Other Recognition : | NEMA Premium(R) Rated |
Based on 0 reviews
Be the first to review “Brake Motor: Totally Enclosed Fan-Cooled, 1 HP, 1,800 Nameplate RPM, 208-230/460V AC”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U1P2D -
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: D2P2H -
General Purpose DC Motors
DC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting
General Purpose DC MotorsDC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting
NEMA frame general purpose DC motors have standard dimensions with a specific NEMA designation that allows drop-in replacement of motors from multiple suppliers with no modifications required to existing installations. They are designed for mechanical loads, air moving, and for hard-to-start applications such as conveyors, belt-driven equipment, machine tools, and reciprocating pumps.
SKU: G641 -
Definite Purpose Motors
Vector Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 7 1/2 HP, 230/460V AC
Definite Purpose MotorsVector Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 7 1/2 HP, 230/460V AC
These 2000:1 constant torque vector (inverter) AC motors can be operated at 1/2000 of the base speed in blower, fan, and pump applications. Motors can handle low speeds without overheating.
SKU: 213THFS8028
There are no reviews yet.