Carbonator Pump Motor: Cradle Base Mounting, 1/3 HP, 1,725 Nameplate RPM, 115V AC
Split-phase carbonator pump AC motors are single phase with a lower starting torque for softer startup where the pump must gradually come up to speed after startup. They have an open dripproof (ODP) enclosure with ventilation openings in the endshields and shell positioned so that drops of liquid falling within 15? from vertical will not affect motor performance.
$334.33
| Item : | Carbonator Pump Motor |
| Motor Application : | Pump |
| Motor Sub Application : | Carbonator Pump |
| Phase : | Single |
| Motor Design : | Split-Phase |
| HP : | 1/3 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 115V AC |
| Full Load Amps : | 6.1 |
| Frame : | 48Y |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | Auto |
| Ins. Class : | B |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Cradle Base |
| Motor Mounting Position : | All Angle |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 3/16 in |
| Motor Bearings : | Ball |
| Height : | 5 13/16 in |
| Overall Length : | 7 11/16 in |
| Length Less Shaft : | 7 1/2 in |
| Body Dia. : | 5.6 in |
| Weight : | 13 lb |
| Nominal Efficiency : | 51.8 % |
| Standards : | CSA, UL |
Based on 0 reviews
Be the first to review “Carbonator Pump Motor: Cradle Base Mounting, 1/3 HP, 1,725 Nameplate RPM, 115V AC”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 056T34F5302 -
Pump AC Motors
Fire Pump Motor: 60 HP, 3,565 Nameplate RPM, 190/380-400V AC, 326TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 326TSTDCD4022 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 056T34F15593
There are no reviews yet.