General Purpose AC Motors
Showing 17–32 of 113 results
-
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: EFM3116T -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3E143TC-S -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3H143T-S -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1/2 HP, 1,140 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1/2 HP, 1,140 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 056T11D15522 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,755 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,755 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: EM3157TA -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00236OT3E145T-S -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 3 HP, 3,490 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 3 HP, 3,490 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 2NKY6 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U32P2DFC -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 3/4 HP, 56C Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 3/4 HP, 56C Frame
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U34S3AC -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: CEM3550T -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: VEM3554T -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: VEM3584T -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 143TC Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 143TC Frame
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: CEM3581T -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: CEM3546T -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 56C Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 56C Frame
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: VEM3546
