Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 7 1/2 HP, 230/460V AC
IEC 132 frame three-phase IEC metric general purpose AC motors have a 38mm diameter, 80mm length shaft whose center is 132mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
$1,375.92
| Item : | General Purpose Motor |
| Motor Application : | General Application |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 7 1/2 |
| Nameplate RPM : | 3,535 |
| No. of Speeds : | 1 |
| Voltage : | 230/460V AC |
| Full Load Amps : | 17.6/8.8 |
| Frame : | 132S |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | N |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Inverter Rated : | Yes |
| Motor Frame Material : | Cast Iron |
| Shaft Dia. : | 38 mm |
| Shaft Length : | 80 mm |
| Motor Bearings : | Ball |
| Length Less Shaft : | 385 mm |
| Overall Length : | 465 mm |
| Weight : | 167.6 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 89.5 % |
| CC Number : | CC003A |
| Standards : | CE, UL Recognized |
| Manufacturers Warranty Length : | 1 yr |
| Full Load Amps @ 50Hz : | 15.0/7.5 |
| HP @ 50Hz : | 7 1/2 |
Based on 0 reviews
Be the first to review “Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 7 1/2 HP, 230/460V AC”
Related products
-
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16319 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15521 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15516 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366
There are no reviews yet.