Dayton
Showing all 16 results
-
Portable Generators
12,000 Watt Portable Generator, 13.2 gal., Gasoline
Portable Generator, Conventional, Gasoline, Generator Rated Watts 12,000, Surge Watts 19,600 W, 120/240V AC, Generator Amps 100/50, Generator Engine Brand Honda, Generator Starter Type Electric, Generator Outlets 14-50R 120/240V AC (1), 5-20R 120V AC Duplex GFCI (2), L14-30R 120/240V AC Locking Receptacle (1), L5-30R 120V AC Locking Receptacle (1), CARB Compliant Yes, Circuit Breaker Yes, Brushless Engine Alternator, Engine Displacement 688 cc, Engine HP 20.8 hp, Sound Level dB 74.9
- Generator Rated Watts: 12,000
- Generator Fuel Type: Gasoline
- Surge Watts: 19,600
SKU: 6FYA4 -
DC Motor & Control Assemblies
Adjustable Speed Motor: 115V AC Input, 90V DC Armature, 1/2 HP, 1,750 Nameplate RPM, 56C Frame
DC Motor & Control AssembliesAdjustable Speed Motor: 115V AC Input, 90V DC Armature, 1/2 HP, 1,750 Nameplate RPM, 56C Frame
Adjustable speed DC motors have controls to regulate the speed of the motor and have a soft starting capability that reduces stress on the motor. The control can be removed from the motor for remote mounting. Motors are for use in packaging equipment, pumps, fans, blowers, conveyors, and other constant or diminishing torques in commercial and industrial applications.
SKU: 1F800 -
Farm Duty AC Motors
General Purpose Farm Duty Motor: 10, 1,760, 230/460V AC, 215T, 1.15 Motor Service Factor
Farm Duty AC MotorsGeneral Purpose Farm Duty Motor: 10, 1,760, 230/460V AC, 215T, 1.15 Motor Service Factor
General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: 35Z922 -
Farm Duty AC Motors
General Purpose Farm Duty Motor: 3/4, 1,745, 208-230/460V AC, 56, 1.25 Motor Service Factor
Farm Duty AC MotorsGeneral Purpose Farm Duty Motor: 3/4, 1,745, 208-230/460V AC, 56, 1.25 Motor Service Factor
General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: 1EJR5BG -
Farm Duty AC Motors
General Purpose Farm Duty Motor: 7 1/2, 1,765, 230/460V AC, 213T, 1.15 Motor Service Factor
Farm Duty AC MotorsGeneral Purpose Farm Duty Motor: 7 1/2, 1,765, 230/460V AC, 213T, 1.15 Motor Service Factor
General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: 35Z921 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 2 HP, 3,500 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Face Mount, 2 HP, 3,500 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 36VF48 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 2NKX7 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 3,525 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 3,525 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 2NKY4 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 3 HP, 3,490 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 3 HP, 3,490 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 2NKY6 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 2 HP, 3,480 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 2 HP, 3,480 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 36VF69 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1 1/2 HP, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1 1/2 HP, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 31TU34 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1 HP, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1 HP, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 31TU32 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 2 HP, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 2 HP, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 31TU37 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 3 HP, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 3 HP, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 31TU38 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 2NKX8 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 2 HP, 208-230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 2 HP, 208-230/460V AC
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 48ZJ90