IEEE 841 Motor: 150 HP, 1,780 Nameplate RPM, 460V AC, 444/5T Frame, 170.0 Full Load Amps
NEMA 440 frame IEEE 841 motors have a shaft whose center is 11″ above the mounting surface. They have standard NEMA 440 frame construction with standard dimensions that allow drop-in replacement of motors from multiple suppliers with no modifications required to existing installations.
$22,983.90
| Item : | IEEE 841 Motor |
| Motor Application : | IEEE Motor |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 150 |
| Nameplate RPM : | 1,780 |
| No. of Speeds : | 1 |
| Voltage : | 460V AC |
| Full Load Amps : | 170.0 |
| Frame : | 444/5T |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | B |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Motor Shaft Design : | Keyed |
| Motor Frame Material : | Cast Iron |
| Shaft Dia. : | 3 3/8 in |
| Shaft Length : | 8 1/2 in |
| Motor Bearings : | Ball |
| Length Less Shaft : | 36 11/16 in |
| Overall Length : | 45 3/16 in |
| Weight : | 1,873 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 95.8 % |
| CC Number : | CC029A |
| Standards : | CE, CSA, NOM, UL |
| Manufacturers Warranty Length : | 5 yr |
| Full Load Amps @ 50Hz : | 159.0, 163.0, 170, 189.0, 194.0, 205 |
| HP @ 50Hz : | 125, 150 |
| Green Certification or Other Recognition : | NEMA Premium(R) Rated |
Based on 0 reviews
Be the first to review “IEEE 841 Motor: 150 HP, 1,780 Nameplate RPM, 460V AC, 444/5T Frame, 170.0 Full Load Amps”
Related products
-
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 3 HP, 3,480 Nameplate RPM, 460V AC
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 3 HP, 3,480 Nameplate RPM, 460V AC
IEC 90 frame three-phase IEC metric general purpose AC motors have a 24mm diameter, 50mm length shaft whose center is 90mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13984021 -
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 1,155 Nameplate RPM, 460V AC
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 1,155 Nameplate RPM, 460V AC
IEC 90 frame three-phase IEC metric general purpose AC motors have a 24mm diameter, 50mm length shaft whose center is 90mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13984000 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3H143T-S -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 1,765 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 1,765 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118ET3E56C-S
There are no reviews yet.