Saw Arbor Motor: 3-Phase, 7 1/2 HP, 1,730 Nameplate RPM, 208-230/460V AC, 90L Frame, CCWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
$2,286.25
| Item : | Saw Arbor Motor |
| Motor Application : | Power Tool |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 7 1/2 |
| Nameplate RPM : | 1,730 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 22.4-20.3/10.1 |
| Frame : | 90L |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CCWSE |
| Motor Enclosure Design : | Totally Enclosed Air-Over |
| Motor Mounting Type : | Rigid Base |
| Motor Frame Material : | Cast Iron |
| Number of Shafts : | 1 |
| Shaft Dia. : | 1 3/16 in |
| Shaft Length : | 2 1/2 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Position : | F1 |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Overall Length : | 22 1/2 in |
| Length Less Shaft : | 19 15/16 in |
| Weight : | 165 lb |
| Extended Thru-Bolts : | No |
| Nominal Efficiency : | 85.3 % |
| Standards : | NEMA MG-1 |
| Includes : | Terminal Box |
| Manufacturers Warranty Length : | 1.5 yr |
Based on 0 reviews
Be the first to review “Saw Arbor Motor: 3-Phase, 7 1/2 HP, 1,730 Nameplate RPM, 208-230/460V AC, 90L Frame, CCWSE”
Related products
-
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 1,165 Nameplate RPM
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 1,165 Nameplate RPM
IEC 100 frame three-phase IEC metric general purpose AC motors have a 28mm diameter, 60mm length shaft whose center is 100mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13734168 -
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 75 HP, 3,600 Nameplate RPM, 460V AC
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 75 HP, 3,600 Nameplate RPM, 460V AC
IEC 250 frame three-phase IEC metric general purpose AC motors have a 70mm diameter, 140mm length shaft whose center is 250mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 05536ET3Y250SMFF-W2 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,760 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,760 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00158OT3E145TC-S -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00236OT3E145T-S
There are no reviews yet.