Vector Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 1,725 Nameplate RPM
These 1000:1 constant torque vector (inverter) AC motors can be operated at 1/1000 of the base speed in blower, fan, and pump applications. Models can handle low speeds without overheating.
$650.22
| Item : | Vector Motor |
| Motor Application : | Crane |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 230/460V AC |
| Full Load Amps : | 3.2/1.60 |
| Frame : | 56C |
| Torque : | 3 ft-lb |
| Max. Speed : | 5,400 RPM |
| Speed Range : | 1,000:1 |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Max. Operating Frequency : | 120 Hz |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | None |
| Ins. Class : | H |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| NEMA Design : | A |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Face |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Steel |
| Finish : | Black |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 1/16 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Position : | F3 |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Overall Length : | 12 7/16 in |
| Length Less Shaft : | 10 3/8 in |
| Weight : | 27 lb |
| Encoder Acceptable : | No |
| Motor Efficiency Group : | Standard Efficient |
| Nominal Efficiency : | 78.5 % |
| Standards : | CE, UL Recognized |
Based on 0 reviews
Be the first to review “Vector Motor: Totally Enclosed Fan-Cooled, Face Mount, 1 HP, 1,725 Nameplate RPM”
Related products
-
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 F,G, 1 HP, 1,725 Nameplate RPM, 575V AC, Auto
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 F,G, 1 HP, 1,725 Nameplate RPM, 575V AC, Auto
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
SKU: 056T17G15615 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15516 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 056T34F15593 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame, Auto
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame, Auto
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
SKU: 056T17E5309
There are no reviews yet.