Vector Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 125 HP, 460V AC
These 2000:1 constant torque vector (inverter) AC motors can be operated at 1/2000 of the base speed in blower, fan, and pump applications. Motors can handle low speeds without overheating.
$34,584.41
| Item : | Vector Motor |
| Motor Application : | Crane |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 125 |
| Nameplate RPM : | 1,785 |
| No. of Speeds : | 1 |
| Voltage : | 460V AC |
| Full Load Amps : | 138.0 |
| Frame : | 444T |
| Max. Speed : | 1,800 RPM |
| Speed Range : | 2,000:1 |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Max. Operating Frequency : | 90 Hz |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | T-Stat |
| Ins. Class : | H |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| NEMA Design : | B |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Cast Iron |
| Finish : | Enamel |
| Shaft Dia. : | 3 3/8 in |
| Shaft Length : | 8 3/4 in |
| Motor Shaft Design : | Keyed |
| Encoder Shaft Dimensions : | 1 in x 1 3/4 in |
| Conduit Box Position : | F1, F2 |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Overall Length : | 54 7/8 in |
| Weight : | 2,430 lb |
| Encoder Acceptable : | Yes |
| Motor Efficiency Group : | Energy Efficient |
| Nominal Efficiency : | 95 % |
| Standards : | CE, CSA, UL Recognized |
| Manufacturers Warranty Length : | 3 yr |
Based on 0 reviews
Be the first to review “Vector Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 125 HP, 460V AC”
Related products
-
Pump AC Motors
Vertical Pump Motor: 7 1/2 HP, 3,525 Nameplate RPM, 230/460V AC, 213HPV Frame
Three-phase vertical pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size.
SKU: 213TTFWD16016 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16319 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 F,G, 1 1/2 HP, 1,725 Nameplate RPM, 230/460V AC
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 F,G, 1 1/2 HP, 1,725 Nameplate RPM, 230/460V AC
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
SKU: 056T17G15601 -
Pump AC Motors
Fire Pump Motor: 60 HP, 3,565 Nameplate RPM, 190/380-400V AC, 326TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 326TSTDCD4022
There are no reviews yet.