Farm Duty AC Motors
Auger Duty Motor: 1/2, 1,725, 115/208-230V AC, 48Y, Manual, 1.15 Motor Service Factor, Flat
$581.32
| Item : | Auger Duty Motor |
| Item – Farm Duty Motors : | Auger Motor |
| Motor Application : | Farm Duty |
| Motor Sub Application : | Auger |
| Phase : | Single |
| Motor Design : | Capacitor-Start/Induction-Run |
| HP : | 1/2 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 115/208-230V AC |
| Full Load Amps : | 8.0/4.4-4.0 |
| Frame : | 48Y |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | Manual |
| Ins. Class : | F |
| Max. Ambient Temp. : | 104 Degrees F |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CCWSE |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Face |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Rolled Steel |
| Shaft Dia. : | 1/2 in |
| Shaft Length : | 1 1/2 in |
| Motor Shaft Design : | Flat |
| Motor Bearings : | Ball |
| Overall Length : | 10 23/32 in |
| Length Less Shaft : | 9 7/32 in |
| Weight : | 25 lb |
| Bolt Circle Dia. : | 7 1/4 in |
| Standards : | CSA Certified, UL Recognized |
| Capacitor Required : | Yes |
Based on 0 reviews
Be the first to review “Auger Duty Motor: 1/2, 1,725, 115/208-230V AC, 48Y, Manual, 1.15 Motor Service Factor, Flat”
Related products
-
Definite Purpose Motors
Instant Reverse Motor: Cradle Base, 1/2 HP, 1,625 Nameplate RPM, 115V AC, S56 Frame
Definite Purpose MotorsInstant Reverse Motor: Cradle Base, 1/2 HP, 1,625 Nameplate RPM, 115V AC, S56 Frame
Capacitor-start instant reverse AC motors use a capacitor to provide additional power during startup for higher torque and better efficiency compared to split-phase motors. They have an open dripproof (ODP) enclosure with ventilation openings in the endshields and shell placed so drops of liquid falling within 15? from vertical will not affect motor performance.
SKU: 191743 -
Washdown Motor
Washdown Motor: 1 HP, 1,750 Nameplate RPM, 56C Frame, Face/Base Mounting, 90V DC
Stainless steel washdown DC motors are for use in wet/high-humidity environments and have a stainless steel motor shell with a finish that resists rust and corrosion. They are commonly used where sanitation procedures with hot pressurized water and cleaning solutions are performed several times each day.
SKU: 109075
There are no reviews yet.