Extra High Torque Farm Duty Motor: 7 1/2, 1,750, 230V AC, 215TZ, Manual, Keyed
Extra-high-torque farm-duty AC motors have up to 400% starting torque for extremely hard-starting applications and can start under full-load conditions in powering conveyors, silo unloaders, barn cleaners, compressors, and manure pumps. Motors have enclosures that help protect them from moisture, but they are not airtight or waterproof.
$2,057.80
| Item : | General Purpose Farm Duty Motor |
| Item – Farm Duty Motors : | General Purpose Farm Duty Motor |
| Motor Application : | Farm Duty |
| Phase : | Single |
| Motor Design : | Capacitor-Start/Run |
| HP : | 7 1/2 |
| Nameplate RPM : | 1,750 |
| No. of Speeds : | 1 |
| Voltage : | 230V AC |
| Full Load Amps : | 30.5 |
| Frame : | 215TZ |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | Manual |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Steel |
| Finish : | Enamel |
| Shaft Dia. : | 1 1/8 in |
| Shaft Length : | 3 1/2 in |
| Motor Shaft Design : | Keyed |
| Motor Bearings : | Ball |
| Overall Length : | 21 1/16 in |
| Length Less Shaft : | 17 9/16 in |
| Weight : | 155 lb |
| Motor Efficiency Group : | Standard Efficient |
| Nominal Efficiency : | 85.5 % |
| Standards : | CSA Certified, UL Recognized |
| Capacitor Required : | Yes |
| Includes : | Condensate Drain, Shaft Slinger |
Based on 0 reviews
Be the first to review “Extra High Torque Farm Duty Motor: 7 1/2, 1,750, 230V AC, 215TZ, Manual, Keyed”
Related products
-
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 230/460V AC
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 184TTDBD6085 -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3 HP, 575V AC
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 056T34F15593 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16319 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366
There are no reviews yet.