Item : | General Purpose Motor |
Motor Application : | General Application |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 1 |
Nameplate RPM : | 1,725 |
No. of Speeds : | 1 |
Voltage : | 230/460V AC |
Full Load Amps : | 3.0/1.50 |
Frame : | 56HC |
Usable @ 208V : | No |
Usable @ 200V : | No |
Hz : | 60/50 |
Motor Service Factor : | 1.15 |
Max. Ambient Temp. : | 40 Degrees C |
Duty Cycle : | Continuous |
Ins. Class : | B |
Motor Enclosure Design : | Open Dripproof |
Motor Shaft Rotation : | CW/CCW |
Motor Mounting Type : | Rigid Base |
Motor Mounting Position : | Horizontal |
Inverter Rated : | Yes |
Motor Shaft Design : | Keyed |
Motor Frame Material : | Steel |
Shaft Dia. : | 5/8 in |
Shaft Length : | 1 15/16 in |
Motor Bearings : | Ball |
Length Less Shaft : | 10 1/16 in |
Overall Length : | 11 15/16 in |
Weight : | 36 lb |
Motor Efficiency Group : | Premium Efficient |
Nominal Efficiency : | 83.5 % |
CC Number : | CC003A |
Standards : | CE, CSA, UL Recognized |
Full Load Amps @ 50Hz : | 3.0/1.50 |
HP @ 50Hz : | 1 |
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,725 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$437.02
There are no reviews yet.