General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1/2 HP, 1,160 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$451.22
| Item : | General Purpose Motor |
| Motor Application : | General Application |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1/2 |
| Nameplate RPM : | 1,160 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 2.2-2.00/0.99 |
| Frame : | 56C |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Face/Base |
| Motor Mounting Position : | All Angle |
| Inverter Rated : | Yes |
| Motor Shaft Design : | Keyed |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 1 7/8 in |
| Motor Bearings : | Ball |
| Length Less Shaft : | 10 7/16 in |
| Overall Length : | 12 5/16 in |
| Weight : | 26.6 lb |
| Nominal Efficiency : | 72 % |
| Standards : | CSA, UL |
| Manufacturers Warranty Length : | 3 yr |
| Full Load Amps @ 50Hz : | 2.02/1.07, 2.1/1.07 |
| HP @ 50Hz : | 1/2 |
| Green Environmental Attribute : | Does not Contain Formaldehyde |
Based on 0 reviews
Be the first to review “General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1/2 HP, 1,160 Nameplate RPM”
Related products
-
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 1/2 HP, 1,760 Nameplate RPM
Pump AC MotorsClose-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 1/2 HP, 1,760 Nameplate RPM
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 00158OT3E145JM-S -
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
IEC 80 frame three-phase IEC metric general purpose AC motors have a 19mm diameter, 40mm length shaft whose center is 80mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13984006 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 575V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3H143T-S -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3E143TC-S
There are no reviews yet.