Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 4 HP, 230/460V AC
IEC 100 frame three-phase IEC metric general purpose AC motors have a 28mm diameter, 60mm length shaft whose center is 100mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
$847.13
| Item : | Metric Motor |
| Motor Application : | General Application |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 4 |
| Nameplate RPM : | 3,499 |
| No. of Speeds : | 1 |
| Voltage : | 230/460V AC |
| Full Load Amps : | 9.8/4.9 |
| Frame : | 100L |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | N |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Inverter Rated : | Yes |
| Motor Frame Material : | Cast Iron |
| Shaft Dia. : | 28 mm |
| Shaft Length : | 60 mm |
| Motor Bearings : | Ball |
| Length Less Shaft : | 338 mm |
| Overall Length : | 398 mm |
| Weight : | 90.4 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 88.5 % |
| CC Number : | CC003A |
| Standards : | CE, UL Recognized |
| Manufacturers Warranty Length : | 1 yr |
Based on 0 reviews
Be the first to review “Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 4 HP, 230/460V AC”
Related products
-
Pump AC Motors
Vertical Pump Motor: 7 1/2 HP, 3,525 Nameplate RPM, 230/460V AC, 213HPV Frame
Three-phase vertical pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size.
SKU: 213TTFWD16016 -
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 230/460V AC
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 184TTDBD6085 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 143TTDR16056 -
Pump AC Motors
Carbonator Pump Motor: Cradle Base Mounting, 1/3 HP, 1,725 Nameplate RPM, 115V AC
Split-phase carbonator pump AC motors are single phase with a lower starting torque for softer startup where the pump must gradually come up to speed after startup. They have an open dripproof (ODP) enclosure with ventilation openings in the endshields and shell positioned so that drops of liquid falling within 15? from vertical will not affect motor performance.
SKU: 5KH32ENA443X
There are no reviews yet.