Motor,3PH,1.5HP,1800,575V,Steel Fr: Totally Enclosed Fan-Cooled, Rigid Base Mount
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$594.61
| Item : | General Purpose Motor |
| Motor Application : | General Application |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 1/2 |
| Nameplate RPM : | 1,755 |
| No. of Speeds : | 1 |
| Voltage : | 575V AC |
| Full Load Amps : | 1.70 |
| Frame : | 145T |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.25 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | B |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Inverter Rated : | Yes |
| Motor Shaft Design : | Keyed |
| Part Winding Start Capable : | Yes |
| Removable Base : | Regreasable Bearings |
| Motor Frame Material : | Rolled Steel |
| Shaft Dia. : | 7/8 in |
| Shaft Length : | 2 1/4 in |
| Motor Bearings : | Ball |
| Bearing Protection : | Double Shielded |
| Length Less Shaft : | 10 3/16 in |
| Overall Length : | 13 in |
| Weight : | 35 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 86.5 % |
| CC Number : | CC030A |
| Standards : | CE, CSA |
Based on 0 reviews
Be the first to review “Motor,3PH,1.5HP,1800,575V,Steel Fr: Totally Enclosed Fan-Cooled, Rigid Base Mount”
Related products
-
Definite Purpose Motors
Instant Reverse Motor: Rigid Base, 1/2 HP, 1,800 Nameplate RPM, 115V AC, 56 Frame
Definite Purpose MotorsInstant Reverse Motor: Rigid Base, 1/2 HP, 1,800 Nameplate RPM, 115V AC, 56 Frame
Permanent split capacitor (PSC) instant reverse AC motors have a capacitor that decreases the amount of power consumed for a given load making them more energy efficient than shaded pole motors. They have an open dripproof (ODP) enclosure with ventilation openings in the endshields and shell placed so drops of liquid falling within 15? from vertical will not affect motor performance.
SKU: D12ARM2N -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U1P2D -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1/4 HP
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1/4 HP
NEMA 42 frame capacitor-start general purpose AC motors have a standard 3/8″ diameter, 1-1/8″ length shaft whose center is 2-5/8″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 42CZ. The letter ?C? indicates that the motor can be face mounted and ?Z? indicates that the frame has a nonstandard shaft. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: L3356 -
General Purpose DC Motors
DC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting
General Purpose DC MotorsDC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting
NEMA frame general purpose DC motors have standard dimensions with a specific NEMA designation that allows drop-in replacement of motors from multiple suppliers with no modifications required to existing installations. They are designed for mechanical loads, air moving, and for hard-to-start applications such as conveyors, belt-driven equipment, machine tools, and reciprocating pumps.
SKU: G641
There are no reviews yet.