DC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting
NEMA frame general purpose DC motors have standard dimensions with a specific NEMA designation that allows drop-in replacement of motors from multiple suppliers with no modifications required to existing installations. They are designed for mechanical loads, air moving, and for hard-to-start applications such as conveyors, belt-driven equipment, machine tools, and reciprocating pumps.
$790.84
| Item : | DC Permanent Magnet Motor |
| Motor Application : | General Application |
| Motor Design : | Permanent Magnet DC |
| HP : | 1 |
| Nameplate RPM : | 2,500 |
| Voltage : | 90V DC |
| Full Load Amps : | 10.0 |
| Frame : | 56C |
| Full Load Torque : | 25.2 in-lb |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Motor Shaft Rotation : | CW/CCW |
| Duty Cycle : | Continuous |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Rigid Base |
| Removable Base : | Yes |
| Shaft Dia. : | 5/8 in |
| Motor Bearings : | Ball |
| Shaft Length : | 2 1/16 in |
| Brush Type : | Carbon |
| Overall Length : | 13 5/16 in |
| Length Less Shaft : | 11 1/4 in |
| Weight : | 37 lb |
| Bolt Circle Dia. : | 5 15/16 in |
| Nominal Efficiency : | 83.4 % |
| Standards : | CSA, UL |
| Stud Quantity : | 4 |
| Manufacturers Warranty Length : | 1 yr |
Based on 0 reviews
Be the first to review “DC Permanent Magnet Motor: 1 HP, 2,500 Nameplate RPM, 56C Frame, Rigid Base Mounting”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U32P2D -
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: D32P1AHC -
Farm Duty AC Motors
High Torque Farm Duty Motor: 3/4, 1,725, 115/230V AC, 56, Manual, Keyed
High torque farm-duty AC motors can power conveyors, silo unloaders, barn cleaners, compressors, and manure pumps under heavy load conditions. Motors have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: FD34CM2P
There are no reviews yet.