Evaporative Cooler Motor: 1 Speed, 3/4 HP, 1,725 Nameplate RPM, 115V AC, 56Z Frame, CWSE
Split-phase evaporative cooler AC motors are single phase with a lower starting torque for softer startup where the cooling fan must gradually come up to speed after startup.
$234.41
| Item : | Evaporator Cooler Motor |
| Motor Application : | HVAC/R |
| Motor Sub Application : | Evaporator Cooler |
| Phase : | Single |
| Motor Design : | Split-Phase |
| HP : | 3/4 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 115V AC |
| Full Load Amps : | 10.7 |
| Frame : | 56Z |
| Hz : | 60 |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | Auto |
| Ins. Class : | B |
| Duty Cycle : | Continuous |
| Max. Ambient Temp. : | 40 Degrees C |
| Motor Shaft Rotation : | CWSE |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Ring |
| Shaft Length : | 1 5/8 in |
| Shaft Dia. : | 1/2 in |
| Motor Bearings : | Ball |
| Body Dia. : | 6 5/16 in |
| Overall Length : | 9 3/8 in |
| Length Less Shaft : | 7 13/16 in |
| Ring to Ring Center : | 7 7/16 in |
| Resilient Ring Dia. : | 2 1/2 in |
| Standards : | CSA (156060), UL (E22922) |
Based on 0 reviews
Be the first to review “Evaporative Cooler Motor: 1 Speed, 3/4 HP, 1,725 Nameplate RPM, 115V AC, 56Z Frame, CWSE”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U32P2DFC -
HVAC AC Motors
HVAC Motor: Open Air-Over, 1/100, 1/250 HP, 1,540/1,390 Nameplate RPM, 1 Speed, 115V AC
HVAC AC MotorsHVAC Motor: Open Air-Over, 1/100, 1/250 HP, 1,540/1,390 Nameplate RPM, 1 Speed, 115V AC
Shaded pole 3.3-inch diameter HVAC AC motors have a low starting torque that provides a smooth and quiet start up while being more economical than other types of replacement motors used in blower applications such as bathroom fans and range hoods.
SKU: D1162 -
Pump AC Motors
Vertical Pump Motor: 1 HP, 3,600 Nameplate RPM, 208-230/460V AC, 56C Frame
Three-phase vertical pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size.
SKU: EE511 -
Definite Purpose Motors
Brake Motor: Totally Enclosed Fan-Cooled, 1 1/2 HP, 1,800 Nameplate RPM, 208-230/460V AC
Definite Purpose MotorsBrake Motor: Totally Enclosed Fan-Cooled, 1 1/2 HP, 1,800 Nameplate RPM, 208-230/460V AC
Three-phase brake AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They require no capacitor, start winding, centrifugal switch, or other starting device that can wear out and fail. They are for use in applications that require rapid stopping and holding action.
SKU: BMU32P2DFCR
There are no reviews yet.