Vertical Pump Motor: 1 HP, 3,600 Nameplate RPM, 208-230/460V AC, 56C Frame
Three-phase vertical pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size.
$388.85
| Item : | Vertical Pump Motor |
| Motor Application : | Pump |
| Motor Sub Application : | Pool and Spa Pump |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 |
| Nameplate RPM : | 3,600 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 4.6-4.6/2.3 |
| Frame : | 56C |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.4 |
| Motor Thermal Protection : | None |
| Ins. Class : | B |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| NEMA Design : | C |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Face |
| Motor Mounting Position : | All Angle |
| Motor Frame Material : | Steel |
| Finish : | Unfinished |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 in |
| Shaft Material : | Stainless Steel |
| Motor Shaft Design : | Threaded |
| Motor Bearings : | Ball |
| Overall Length : | 11 9/16 in |
| Length Less Shaft : | 9 9/16 in |
| Weight : | 17 lb |
| Motor Efficiency Group : | Standard Efficient |
| CC Number : | CC030A |
| Nominal Efficiency : | 67.5 % |
| Standards : | CSA Certified, UL Recognized |
Based on 0 reviews
Be the first to review “Vertical Pump Motor: 1 HP, 3,600 Nameplate RPM, 208-230/460V AC, 56C Frame”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U1P2D -
General Purpose AC Motors
Motor,3PH,1.5HP,1800,575V,Steel Fr: Totally Enclosed Fan-Cooled, Rigid Base Mount
General Purpose AC MotorsMotor,3PH,1.5HP,1800,575V,Steel Fr: Totally Enclosed Fan-Cooled, Rigid Base Mount
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U32P2G -
General Purpose AC Motors
Motor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
General Purpose AC MotorsMotor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: T34S2G -
Farm Duty AC Motors
High Torque Farm Duty Motor: 3/4, 1,725, 115/230V AC, 56, Manual, Keyed
High torque farm-duty AC motors can power conveyors, silo unloaders, barn cleaners, compressors, and manure pumps under heavy load conditions. Motors have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: FD34CM2P
There are no reviews yet.