Evaporative Cooler Motor: 1 Speed, 1/2 HP, 1,725 Nameplate RPM, 115V AC, 56 Frame, CWSE, Ring
Split-phase evaporative cooler AC motors are single phase with a lower starting torque for softer startup where the cooling fan must gradually come up to speed after startup.
$226.04
| Item : | Evaporative Cooler Motor |
| Motor Application : | HVAC/R |
| Motor Sub Application : | Evaporator Cooler |
| Phase : | Single |
| Motor Design : | Split-Phase |
| HP : | 1/2 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 115V AC |
| Full Load Amps : | 8.2 |
| Frame : | 56 |
| Output Watts : | 370 W |
| Hz : | 60 |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | Auto |
| Ins. Class : | B |
| Duty Cycle : | Continuous |
| Max. Ambient Temp. : | 40 Degrees C |
| Motor Shaft Rotation : | CWSE |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Ring |
| Motor Frame Material : | Steel |
| Motor Mounting Position : | All Angle |
| Shaft Length : | 1 11/16 in |
| Shaft Dia. : | 1/2 in |
| Removable Base : | Yes |
| Conduit Box Location : | Exterior |
| Conduit Box Position : | F1 |
| Motor Bearings : | Ball |
| Body Dia. : | 6 7/16 in |
| Overall Length : | 9 9/16 in |
| Length Less Shaft : | 7 7/8 in |
| Ring to Ring Center : | 7 7/16 in |
| Features : | Epoxy Paint Over a Layer of Zinc Phosphate Helps Prevent Corrosion |
| Weight : | 15.9 lb |
| Resilient Ring Dia. : | 2 1/2 in |
| Nominal Efficiency : | 55.5 % |
| Standards : | UL Recognized for US and Canada |
Based on 0 reviews
Be the first to review “Evaporative Cooler Motor: 1 Speed, 1/2 HP, 1,725 Nameplate RPM, 115V AC, 56 Frame, CWSE, Ring”
Related products
-
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 1/2 HP, 1,760 Nameplate RPM
Pump AC MotorsClose-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 1/2 HP, 1,760 Nameplate RPM
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 00158OT3E145JM-S -
Definite Purpose Motors
Saw Arbor Motor: 3-Phase, 10 HP, 3,480 Nameplate RPM, 208-230/460V AC, 90L Frame, CWSE
Definite Purpose MotorsSaw Arbor Motor: 3-Phase, 10 HP, 3,480 Nameplate RPM, 208-230/460V AC, 90L Frame, CWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
SKU: 01036ES3ESA90LL -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00118OT3E143TC-S -
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 7 1/2 HP, 3,545 Nameplate RPM
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 7 1/2 HP, 3,545 Nameplate RPM
IEC 132 frame three-phase IEC metric general purpose AC motors have a 38mm diameter, 80mm length shaft whose center is 132mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13984840
There are no reviews yet.