Fire Pump Motor: 300 HP, 1,780 Nameplate RPM, 460V AC, 447TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
$27,628.82
| Item : | Fire Pump Motor |
| Motor Application : | Pump |
| Motor Sub Application : | Fire Pump |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 300 |
| Nameplate RPM : | 1,780 |
| No. of Speeds : | 1 |
| Voltage : | 460V AC |
| Full Load Amps : | 345 |
| Frame : | 447TS |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 50 Degrees C |
| Duty Cycle : | Continuous |
| NEMA Design : | B |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Inverter Rated : | No |
| Motor Frame Material : | Cast Iron |
| Shaft Dia. : | 2 3/8 in |
| Shaft Length : | 5 1/16 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Position : | F1, F2 |
| Motor Bearings : | Ball |
| Height : | 26 13/16 in |
| Overall Length : | 39 9/16 in |
| Length Less Shaft : | 34 9/16 in |
| Body Dia. : | 24.1 in |
| Weight : | 1,994 lb |
| Motor Efficiency Group : | Energy Efficient |
| Nominal Efficiency : | 95.4 % |
| Standards : | CE, CSA, IP 12, UL |
| Includes : | Conduit Box |
Based on 0 reviews
Be the first to review “Fire Pump Motor: 300 HP, 1,780 Nameplate RPM, 460V AC, 447TS Frame”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTFC6026 -
Pump AC Motors
Vertical Pump Motor: 7 1/2 HP, 3,525 Nameplate RPM, 230/460V AC, 213HPV Frame
Three-phase vertical pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size.
SKU: 213TTFWD16016 -
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 230/460V AC
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 184TTDBD6085 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56H Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56H Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15527
There are no reviews yet.