Pressure Washer Motor: Totally Enclosed Fan-Cooled, Rigid Base Mounting, 2 HP
Capacitor-start pressure washer AC motors use a capacitor to provide additional power during startup for higher torque and better efficiency.
$715.92
| Item : | Pressure Washer Motor |
| Motor Application : | Pressure Washer |
| Phase : | Single |
| Motor Design : | Capacitor-Start/Run |
| HP : | 2 |
| Nameplate RPM : | 3,450 |
| No. of Speeds : | 1 |
| Voltage : | 115/230V AC |
| Full Load Amps : | 17.5/8.7 |
| Frame : | 56HC |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | Manual |
| Ins. Class : | B |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 1 7/8 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Position : | F3 |
| Conduit Box Location : | Exterior |
| Bolt Circle Dia. : | 5 7/8 in |
| Motor Bearings : | Ball |
| Height : | 8 15/16 in |
| Overall Length : | 13 5/16 in |
| Length Less Shaft : | 11 7/16 in |
| Body Dia. : | 7.4 in |
| Weight : | 42 lb |
| Nominal Efficiency : | 80.5 % |
| Standards : | CE, UL Recognized |
Based on 0 reviews
Be the first to review “Pressure Washer Motor: Totally Enclosed Fan-Cooled, Rigid Base Mounting, 2 HP”
Related products
-
Pump AC Motors
Fire Pump Motor: 350 HP, 3,565 Nameplate RPM, 460V AC, 447TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 447TSTDN7003 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15521 -
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 230/460V AC
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 184TTDBD6085 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366
There are no reviews yet.