Item : | DC Washdown Motor |
Motor Application : | Washdown |
Phase : | Single |
Motor Design : | Permanent Magnet DC |
HP : | 1/3 |
Nameplate RPM : | 1,750 |
No. of Speeds : | 1 |
Voltage : | 180V DC |
Full Load Amps : | 1.90 |
Frame : | 56C |
Usable @ 208V : | No |
Usable @ 200V : | No |
Motor Service Factor : | 1 |
Motor Thermal Protection : | None |
Ins. Class : | F |
Max. Ambient Temp. : | 40 Degrees C |
Duty Cycle : | Continuous |
Motor Shaft Rotation : | CCW, CW |
Motor Enclosure Design : | Totally Enclosed Nonventilated |
Motor Mounting Type : | Face/Base |
Motor Frame Material : | Stainless Steel |
Endshield Material : | 300 Stainless Steel |
Shaft Dia. : | 5/8 in |
Shaft Length : | 2 1/16 in |
Shaft Material : | Stainless Steel |
Conduit Box Location : | Exterior |
Motor Bearings : | Ball |
Overall Length : | 12 13/16 in |
Length Less Shaft : | 10 7/8 in |
Body Dia. : | 6.5 in |
Weight : | 44 lb |
Bolt Circle Dia. : | 5 7/8 in |
Nominal Efficiency : | 73.7 % |
Standards : | BISSC, CE, CSA, UL |
Manufacturers Warranty Length : | 1 yr |
Washdown DC Motors
Washdown Motor: 1/3 HP, 1,750 Nameplate RPM, 56C Frame, Face/Base Mounting
Stainless steel washdown DC motors are for use in wet/high-humidity environments and have a stainless steel motor shell with a finish that resists rust and corrosion. They are commonly used where sanitation procedures with hot pressurized water and cleaning solutions are performed several times each day.
$1,976.89
There are no reviews yet.