STT12V150: FLOODED TUBULAR BATTERY
165 Ah (8 Hr. Rate) to 199 Ah (240 Hr. Rate) 12 Volt Battery
The STT12V150 (3 OPzS 12-150) flooded tubular battery is manufactured with lead selenium and low antimony, allowing for a 20-year design life. By utilizing a small amount of selenium in the grid alloy, a dense, fine grain structure is produced. This alloy is extremely corrosion-resistant and virtually eliminates inter-granular corrosion, one of the most common causes of cell failure.
A lead selenium cell combines the advantages of both lead-calcium and lead-antimony cells while exhibiting none of the disadvantages.
Our STT Series batteries are manufactured under OPzS DIN40736 standards.
Constant current discharge in Amperes to 1.75 V/cell at 77°?F
|Part No.||1 min.||15 min.||30 min.||1 hr.||1.5hr.||2 hr.||3 hr.||5 hr.||6 hr.||8 hr.||24 hr.|
- 20-year design life
- Watering intervals: 1-3 years
- Leak-proof post seal
- High cycle life: 1200+ cycles @ 80% DOD
- 100%+ capacity upon delivery
- No positive plate growth
- Tank formed plates
- Safe — zero voltage exposed to personnel
- Flip-top, easy-fill, flame arrestor vent caps
- Withstands high-temperature applications better than lead-calcium batteries
- Many in stock and ready to ship!
Technical Data Product Specification
|Name||STT12V150: Flooded Tubular Battery|
|OPzS DINStd. 30736
|12V 3 OPzS
|8 hr. Ah Rate||165
|Voltage (V)||12||No. of Positive Plates||3|
|Weight w/ Electrolyte (lb.)
|Cell Dimension (Inches)||15.0L x 8.08W x 15.1H|
|Electrolyte Weight (lb.)
|23.8||8 Hr. Ah Rate to 1.75 V/cell||165|
|2.3||Electrolyte Weight (lbs.)||31.7|
|Short Circuit Current (Amps)
|620||Electrolyte Volume (gallons)||3.1|
|Part No.||STT12V50||I.R. (m0hms)||7.17|
|OPzS DINStd. 30736
|12V 1 OPzS 50||Short Circuit Current (Amps)||1780|
- Switchgear / Substations
- Power Generation
- Microwave Relay Sites
- Solar / Photovoltaic
- Oil & Gas
→Amps Supply is a leading distributor for all batteries.