Item : | Saw Arbor Motor |
Motor Application : | Power Tool |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 3 |
Nameplate RPM : | 3,500 |
No. of Speeds : | 1 |
Voltage : | 208-230/460V AC |
Full Load Amps : | 9.5-8.6/4.3 |
Frame : | 80S |
Usable @ 208V : | Yes |
Usable @ 200V : | No |
Hz : | 60 |
Motor Service Factor : | 1 |
Motor Thermal Protection : | None |
Ins. Class : | F |
Max. Ambient Temp. : | 40 Degrees C |
Duty Cycle : | Continuous |
Motor Shaft Rotation : | CWSE |
Motor Enclosure Design : | Totally Enclosed Air-Over |
Motor Mounting Type : | Rigid Base |
Motor Mounting Position : | Horizontal |
Motor Frame Material : | Cast Iron |
Number of Shafts : | 1 |
Shaft Dia. : | 1 3/16 in |
Shaft Length : | 2 1/2 in |
Motor Shaft Design : | Keyed |
Conduit Box Position : | F1 |
Conduit Box Location : | Exterior |
Motor Bearings : | Ball |
Overall Length : | 18 9/16 in |
Length Less Shaft : | 16 in |
Extended Thru-Bolts : | No |
Nominal Efficiency : | 80.5 % |
Standards : | NEMA MG-1 |
Includes : | Terminal Box |
Manufacturers Warranty Length : | 1.5 yr |
Definite Purpose Motors
Saw Arbor Motor: 3-Phase, 3 HP, 3,500 Nameplate RPM, 208-230/460V AC, 80S Frame, CWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
$1,199.04
There are no reviews yet.