Saw Arbor Motor: 3-Phase, 3 HP, 3,500 Nameplate RPM, 208-230/460V AC, 80S Frame, CWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
$1,199.04
| Item : | Saw Arbor Motor |
| Motor Application : | Power Tool |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 3 |
| Nameplate RPM : | 3,500 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 9.5-8.6/4.3 |
| Frame : | 80S |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CWSE |
| Motor Enclosure Design : | Totally Enclosed Air-Over |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Cast Iron |
| Number of Shafts : | 1 |
| Shaft Dia. : | 1 3/16 in |
| Shaft Length : | 2 1/2 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Position : | F1 |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Overall Length : | 18 9/16 in |
| Length Less Shaft : | 16 in |
| Extended Thru-Bolts : | No |
| Nominal Efficiency : | 80.5 % |
| Standards : | NEMA MG-1 |
| Includes : | Terminal Box |
| Manufacturers Warranty Length : | 1.5 yr |
Based on 0 reviews
Be the first to review “Saw Arbor Motor: 3-Phase, 3 HP, 3,500 Nameplate RPM, 208-230/460V AC, 80S Frame, CWSE”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1/2 HP, 1,160 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face/Base Mount, 1/2 HP, 1,160 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 5012ES3E56C-S -
Definite Purpose Motors
Saw Arbor Motor: 3-Phase, 10 HP, 3,600 Nameplate RPM, 575V AC, 90L Frame, CWSE
Definite Purpose MotorsSaw Arbor Motor: 3-Phase, 10 HP, 3,600 Nameplate RPM, 575V AC, 90L Frame, CWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
SKU: 01036ES3HSA90LL -
Pump AC Motors
Oil Well Pumping Motor: 10 HP, 1,110 Nameplate RPM, 208-230/460V AC, 256T Frame, Open Dripproof
Pump AC MotorsOil Well Pumping Motor: 10 HP, 1,110 Nameplate RPM, 208-230/460V AC, 256T Frame, Open Dripproof
Three-phase oil well pumping AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 01012OS3EOW256T -
General Purpose AC Motors
Metric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 1,165 Nameplate RPM
General Purpose AC MotorsMetric Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 1/2 HP, 1,165 Nameplate RPM
IEC 100 frame three-phase IEC metric general purpose AC motors have a 28mm diameter, 60mm length shaft whose center is 100mm above the base mounting surface. They are commonly used in countries outside the U.S. to power compressors, conveyors, fans, and pumps that require International Electrotechnical Commission (IEC) electrical standards.
SKU: 13734168
There are no reviews yet.