Motors Archives | Page 5 of 16 | AMPS Supply

View cart “General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 208-230/460V AC” has been added to your cart.

Farm Duty AC Motors
General Purpose Farm Duty Motor: 3/4, 1,745, 208-230/460V AC, 56, 1.25 Motor Service Factor
Farm Duty AC Motors
General Purpose Farm Duty Motor: 3/4, 1,745, 208-230/460V AC, 56, 1.25 Motor Service Factor

0 out of 5
(0)

General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.

SKU: 1EJR5BG
$372.48
Add to cart
Farm Duty AC Motors
General Purpose Farm Duty Motor: 7 1/2, 1,765, 230/460V AC, 213T, 1.15 Motor Service Factor
Farm Duty AC Motors
General Purpose Farm Duty Motor: 7 1/2, 1,765, 230/460V AC, 213T, 1.15 Motor Service Factor

0 out of 5
(0)

General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.

SKU: 35Z921
$1,306.93
Add to cart
Farm Duty AC Motors
General Purpose Motor: 1 1/2, 1,725, 115/208-230V AC, 56HC, Manual, Keyed
Farm Duty AC Motors
General Purpose Motor: 1 1/2, 1,725, 115/208-230V AC, 56HC, Manual, Keyed

0 out of 5
(0)

General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.

SKU: 056B17F5584
$591.35
Add to cart
Farm Duty AC Motors
General Purpose Motor: 1, 1,725, 115/208-230V AC, 56C, Manual, Keyed
Farm Duty AC Motors
General Purpose Motor: 1, 1,725, 115/208-230V AC, 56C, Manual, Keyed

0 out of 5
(0)

General purpose farm-duty motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. Motors are commonly used for augers, air compressors, conveyors, pumps, and other farm equipment. They have enclosures that help protect them from moisture, but they are not airtight or waterproof.

SKU: 056C17F5914
$495.07
Add to cart
Definite Purpose Motors
General Purpose Motor: 100 HP, 1,785 Nameplate RPM, 230/460V AC, 405T Frame
Definite Purpose Motors
General Purpose Motor: 100 HP, 1,785 Nameplate RPM, 230/460V AC, 405T Frame

0 out of 5
(0)

Three-phase rock crusher AC motors operate with extra-high starting torque and operate at low speeds to power cone, jaw, and roller rock crushers, impactors, and pulverizers. They have a totally enclosed fan-cooled (TEFC) enclosure with an external fan in a protective shroud to blow cooling air over the motor to protect against dust and water jets.

SKU: 405TTFC6633
$13,301.03
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: D32P2DC
$570.59
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM

0 out of 5
(0)

NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: D32P1AHC
$261.07
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 HP, 1,725 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 HP, 1,725 Nameplate RPM

0 out of 5
(0)

NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: D1P2AHC
$319.52
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: D2P2H
$627.01
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 1 1/2 HP, 1,755 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 1 1/2 HP, 1,755 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: CEM3154T
$1,175.62
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 2 HP, 1,750 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 2 HP, 1,750 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: CEM3157T
$1,247.16
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 2 HP, 3,500 Nameplate RPM, 230/460V AC
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 2 HP, 3,500 Nameplate RPM, 230/460V AC

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: 36VF48
$392.72
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Face Mount, 3 HP, 3,510 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: 145TTDR16319
$614.93
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,750 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: 2NKX7
$433.75
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,760 Nameplate RPM
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 1,760 Nameplate RPM

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: 00158OT3E145TC-S
$605.27
Add to cart
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 208-230/460V AC
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 1/2 HP, 208-230/460V AC

0 out of 5
(0)

NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).

SKU: EM3120T
$1,096.44
Add to cart

Showing 65–80 of 245 results