General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 HP, 1,725 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$319.52
| Item : | General Purpose Motor |
| Motor Application : | General Application |
| Motor Sub Application : | Carbonator Pump |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 3.2-3.0/1.50 |
| Frame : | 56HC |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | B |
| Motor Enclosure Design : | Open Air-Over |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Rigid Base |
| Motor Mounting Position : | All Angle |
| Inverter Rated : | Yes |
| Motor Shaft Design : | Keyed |
| Removable Base : | Permanently Lubricated Bearings |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 1/16 in |
| Motor Bearings : | Ball |
| Length Less Shaft : | 10 5/16 in |
| Overall Length : | 12 3/8 in |
| Weight : | 26 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| Nominal Efficiency : | 85.3 % |
| CC Number : | CC030A |
| Standards : | CSA, UL |
| Manufacturers Warranty Length : | 2 yr |
| Green Certification or Other Recognition : | NEMA Premium(R) Rated |
Based on 0 reviews
Be the first to review “General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 HP, 1,725 Nameplate RPM”
Related products
-
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Air-Over, Rigid Base Mount, 1 1/2 HP, 56C Frame
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U32P2DFC -
Pump AC Motors
Pool and Spa Pump Motor: Face Mounting, 49/50 HP, 1 Motor Service Factor, 56J Frame
Permanent split capacitor (PSC) pool and spa pump AC motors have a capacitor that decreases the amount of power consumed for a given load. These motors have a one-compartment design that eases installation and maintenance.
SKU: ASB657 -
General Purpose AC Motors
Motor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
General Purpose AC MotorsMotor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: T34S2G -
General Purpose AC Motors
General Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Air-Over, Rigid Base Mount, 2 HP, 1,740 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: D2P2H
There are no reviews yet.