Item : | General Purpose Motor |
Motor Application : | General Application |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 3/4 |
Nameplate RPM : | 1,725 |
No. of Speeds : | 1 |
Voltage : | 575V AC |
Full Load Amps : | 1.10 |
Frame : | 56 |
Usable @ 208V : | No |
Usable @ 200V : | No |
Hz : | 60 |
Motor Service Factor : | 1.15 |
Max. Ambient Temp. : | 40 Degrees C |
Duty Cycle : | Continuous |
Ins. Class : | B |
Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
Motor Shaft Rotation : | CW/CCW |
Motor Mounting Type : | Rigid Base |
Motor Mounting Position : | Horizontal |
Inverter Rated : | No |
Motor Shaft Design : | Keyed |
Part Winding Start Capable : | Yes |
Motor Frame Material : | Rolled Steel |
Shaft Dia. : | 5/8 in |
Shaft Length : | 1 7/8 in |
Motor Bearings : | Ball |
Bearing Protection : | Double Shielded |
Length Less Shaft : | 10 in |
Overall Length : | 11 7/8 in |
Weight : | 26 lb |
Motor Efficiency Group : | Standard Efficient |
Motor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$386.99
There are no reviews yet.