Drive Motor: 1 1/2, 1,725, 115/230V AC, 56NZ, Manual, 1 Motor Service Factor, Keyed
$719.28
| Item : | Drive Motor |
| Item – Farm Duty Motors : | Auger Motor |
| Motor Application : | Farm Duty |
| Motor Sub Application : | Auger |
| Phase : | Single |
| Motor Design : | Capacitor-Start/Run |
| HP : | 1 1/2 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 115/230V AC |
| Full Load Amps : | 15.2/7.6 |
| Frame : | 56NZ |
| Usable @ 208V : | No |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | Manual |
| Ins. Class : | F |
| Max. Ambient Temp. : | 104 Degrees F |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CCWSE |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Mounting Type : | Face |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Rolled Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 1/16 in |
| Motor Shaft Design : | Keyed |
| Motor Bearings : | Ball |
| Overall Length : | 14 3/8 in |
| Length Less Shaft : | 12 21/64 in |
| Weight : | 45 lb |
| Bolt Circle Dia. : | 7 1/4 in |
| Standards : | CSA Certified, UL Recognized |
| Capacitor Required : | Yes |
Based on 0 reviews
Be the first to review “Drive Motor: 1 1/2, 1,725, 115/230V AC, 56NZ, Manual, 1 Motor Service Factor, Keyed”
Related products
-
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 3/4 HP, 3,450 Nameplate RPM, 56 Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 3/4 HP, 3,450 Nameplate RPM, 56 Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C34G15517 -
Pump AC Motors
Fire Pump Motor: 300 HP, 1,780 Nameplate RPM, 460V AC, 447TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 447TSTDN7026 -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 E,F,G, 1 HP, 1,725 Nameplate RPM, 56C Frame
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
SKU: 056C17G15516 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 1,745 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 145TTDR16366
There are no reviews yet.