Item : | Hazardous Location Motor |
Motor Application : | Hazardous Location |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 1/3 |
Nameplate RPM : | 1,725 |
No. of Speeds : | 1 |
Voltage : | 208-230/460V AC |
Full Load Amps : | 1.20-1.20/0.60 |
Frame : | 56 |
Usable @ 208V : | Yes |
Usable @ 200V : | No |
Hz : | 60 |
Max. Ambient Temp. : | 40 Degrees C |
Motor Service Factor : | 1 |
Motor Thermal Protection : | Auto |
Ins. Class : | B |
Hazardous Location Class : | 1 C,D / 2 F,G |
Temp. Code : | T3B |
Motor Enclosure Design : | Totally Enclosed Nonventilated |
Duty Cycle : | Continuous |
Motor Mounting Type : | Rigid Base |
NEMA Design : | B |
Motor Shaft Rotation : | CW/CCW |
Hazardous Location Division : | Division 1 |
Motor Mounting Position : | Horizontal |
Length Less Shaft : | 10 in |
Motor Frame Material : | Steel |
Shaft Dia. : | 5/8 in |
Shaft Length : | 2 in |
Motor Shaft Design : | Keyed |
Conduit Box Location : | Exterior |
Includes : | Explosion Proof Conduit Box |
Motor Bearings : | Ball |
Overall Length : | 12 in |
Weight : | 25 lb |
Motor Efficiency Group : | Standard Efficient |
Nominal Efficiency : | 74.5 % |
Standards : | CSA Certified, UL Listed |
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 F,G, 1/3 HP, 1,725 Nameplate RPM, 56 Frame, Auto
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
$802.58
There are no reviews yet.