Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 HP, 1,760 Nameplate RPM
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
$704.28
| Item : | Close-Coupled Pump Motor |
| Motor Application : | Pump |
| Motor Sub Application : | Close-Coupled Pump |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1 |
| Nameplate RPM : | 1,760 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 3.3-3.0/1.5.0 |
| Frame : | 143/5JM |
| Usable @ 208V : | Yes |
| Usable @ 200V : | Yes |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| NEMA Design : | B |
| Motor Shaft Rotation : | CW/CCW |
| Motor Enclosure Design : | Open Dripproof |
| Motor Mounting Type : | Face/Base |
| Motor Mounting Position : | Horizontal |
| Inverter Rated : | Yes |
| Inverter Rating : | 1000:1 |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 7/8 in |
| Shaft Length : | 4 7/64 in |
| Shaft Material : | Carbon Steel |
| Motor Shaft Design : | JM Threaded |
| Conduit Box Position : | F1 |
| Conduit Box Location : | Exterior |
| Bolt Circle Dia. : | 5 7/8 in |
| Motor Bearings : | Ball |
| Regreasable Bearings : | Regreasable Bearings |
| Height : | 6 3/4 in |
| Overall Length : | 13 11/16 in |
| Length Less Shaft : | 9 7/16 in |
| Body Dia. : | 6.6 in |
| Weight : | 38.5 lb |
| Motor Efficiency Group : | NEMA Premium Efficient |
| CC Number : | CC029A |
| Nominal Efficiency : | 85.5 % |
| Standards : | CSA (LR38324), CSA (LR50962), UL (E104590), UL (E125311) |
| Manufacturers Warranty Length : | 3 yr |
| Green Environmental Attribute : | Does not Contain Phthalates, Formaldehyde, Toxic Metals, Aromatic and Halogenated Compounds, Butoxyethanol, 2-Methoxyethanl, Isophorone, Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Acrolein, Acrylonitrile |
Based on 0 reviews
Be the first to review “Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 1 HP, 1,760 Nameplate RPM”
Related products
-
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 2 HP, 3,510 Nameplate RPM, 230/460V AC
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 00236OT3E145T-S -
HVAC AC Motors
Evaporative Cooler Motor: 1 Speed, 1/2 HP, 1,725 Nameplate RPM, 115V AC, 56 Frame, CWSE, Ring
HVAC AC MotorsEvaporative Cooler Motor: 1 Speed, 1/2 HP, 1,725 Nameplate RPM, 115V AC, 56 Frame, CWSE, Ring
Split-phase evaporative cooler AC motors are single phase with a lower starting torque for softer startup where the cooling fan must gradually come up to speed after startup.
SKU: 5018OS1AEC56 -
Definite Purpose Motors
Saw Arbor Motor: 3-Phase, 10 HP, 3,480 Nameplate RPM, 208-230/460V AC, 90L Frame, CWSE
Definite Purpose MotorsSaw Arbor Motor: 3-Phase, 10 HP, 3,480 Nameplate RPM, 208-230/460V AC, 90L Frame, CWSE
Saw arbor AC motors are three-phase and don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase models of the same HP, rpm, and frame size. They are commonly used with circular saws, pendulum saws, and grinding and polishing machines.
SKU: 01036ES3ESA90LL -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1/2 HP, 1,760 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Face Mount, 1/2 HP, 1,760 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 5018ES3E56CFL-S
There are no reviews yet.