Item : | Deep Well Submersible Pump Motor |
Motor Application : | Pump |
Motor Sub Application : | Deep Well Submersible Pump |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 2 |
Nameplate RPM : | 3,450 |
No. of Speeds : | 1 |
Voltage : | 460V AC |
Full Load Amps : | 3.4 |
Usable @ 208V : | No |
Usable @ 200V : | No |
Max. SF Amps : | 4.1 |
Hz : | 60/50 |
Motor Service Factor : | 1.25 |
Motor Thermal Protection : | None |
Max. Ambient Temp. : | 86 Degrees F |
Duty Cycle : | Continuous |
Motor Shaft Rotation : | CCWSE |
Motor Enclosure Design : | Totally Enclosed Nonventilated |
Number of Wires : | 3 |
Lead Length : | 48 in |
Shaft Material : | Splined Stainless Steel |
Thrust Rating : | 650 lb |
Motor Bearings : | Thrust |
Bearing Protection : | Water Slingers |
Height : | 13 5/8 in |
Body Dia. : | 4 in |
Stator Type : | Hermetically Sealed |
Weight : | 28 lb |
Diaphragm Type : | Pressure Equalizing |
Overload Relay Required : | Yes |
Overload Relay Amp Setting : | 3.8 |
Overload Relay Max. Amp Setting : | 4.1 A |
Starter Required : | 3DY20 |
Standards : | ANSI/NSF 61 Certified, CSA Certified, Industry Standard NEMA Mounting Dimensions, UL 778 Recognized |
Pump AC Motors
Deep Well Submersible Pump Motor: 2 HP, 3,450 Nameplate RPM, 460V AC, 3 Wires
Three-phase submersible deep-well pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase submersible deep-well pump motors of the same HP, rpm, and frame size.
$918.24
There are no reviews yet.