Deep Well Submersible Pump Motor: 5 HP, 3,450 Nameplate RPM, 200V AC, 3 Wires
Three-phase submersible deep-well pump AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase submersible deep-well pump motors of the same HP, rpm, and frame size.
$3,216.85
| Item : | Deep Well Submersible Pump Motor |
| Motor Application : | Pump |
| Motor Sub Application : | Deep Well Submersible Pump |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 5 |
| Nameplate RPM : | 3,450 |
| No. of Speeds : | 1 |
| Voltage : | 200V AC |
| Full Load Amps : | 17.5 |
| Usable @ 208V : | No |
| Usable @ 200V : | Yes |
| Max. SF Amps : | 19.1 |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 86 Degrees F |
| Duty Cycle : | Continuous |
| Motor Shaft Rotation : | CCWSE |
| Motor Enclosure Design : | Totally Enclosed Nonventilated |
| Number of Wires : | 3 |
| Lead Length : | 150 in |
| Shaft Material : | Splined Stainless Steel |
| Thrust Rating : | 1,500 lb |
| Motor Bearings : | Thrust |
| Bearing Protection : | Water Slingers |
| Height : | 22 15/16 in |
| Body Dia. : | 6 in |
| Stator Type : | Hermetically Sealed |
| Weight : | 101 lb |
| Diaphragm Type : | Pressure Equalizing |
| Overload Relay Required : | Yes |
| Overload Relay Amp Setting : | 18.4 |
| Overload Relay Max. Amp Setting : | 20 A |
| Starter Required : | 3DY44 |
| Standards : | Double Flanged NEMA Mounting Design, VFD approved |
Based on 0 reviews
Be the first to review “Deep Well Submersible Pump Motor: 5 HP, 3,450 Nameplate RPM, 200V AC, 3 Wires”
Related products
-
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 3,510 Nameplate RPM
Pump AC MotorsClose-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 2 HP, 3,510 Nameplate RPM
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 00236OT3E145JP-S -
Pump AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mounting, 1 1/2 HP
Capacitor-start/run pressure washer pump AC motors have a main winding and an auxiliary winding with both a start capacitor and a run capacitor for additional power during startup for higher torque and higher operating efficiency.
SKU: 056B17F5302 -
Pump AC Motors
Close-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 5 HP, 1,760 Nameplate RPM
Pump AC MotorsClose-Coupled Pump Motor: Open Dripproof, Face/Base Mounting, 5 HP, 1,760 Nameplate RPM
Three-phase close-coupled pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 00518OT3E184JP-S -
Pump AC Motors
Fire Pump Motor: 300 HP, 1,780 Nameplate RPM, 460V AC, 447TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 447TSTDN7026
There are no reviews yet.