Washdown Brake Motor: 3-Phase, 1/3 HP, 1,725 Nameplate RPM, 208-230/460V AC, 56C
Painted epoxy-coated washdown AC motors have a white epoxy finish that is USDA approved and is resistant to caustic cleaning solutions.
$1,535.14
| Item : | Washdown Brake Motor |
| Motor Application : | Washdown |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 1/3 |
| Nameplate RPM : | 1,725 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 0.65 |
| Frame : | 56C |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Motor Service Factor : | 1.15 |
| Motor Thermal Protection : | None |
| Ins. Class : | F |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Removable Base : | No |
| Motor Shaft Rotation : | CCW, CW |
| Motor Enclosure Design : | Totally Enclosed Nonventilated |
| Motor Mounting Type : | Face/Base |
| Motor Mounting Position : | Horizontal |
| Motor Frame Material : | Steel |
| Finish : | Epoxy |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 1 7/8 in |
| Conduit Box Location : | Exterior |
| Motor Bearings : | Ball |
| Overall Length : | 14 in |
| Length Less Shaft : | 12 1/16 in |
| Body Dia. : | 6.5 in |
| Weight : | 30 lb |
| Bolt Circle Dia. : | 5 7/8 in |
| Motor Efficiency Group : | Standard Efficient |
| Nominal Efficiency : | 72 % |
| Standards : | BISSC, CE, CSA, UL |
| Includes : | 3 ft.-lb. Brake |
| Manufacturers Warranty Length : | 1 yr |
Based on 0 reviews
Be the first to review “Washdown Brake Motor: 3-Phase, 1/3 HP, 1,725 Nameplate RPM, 208-230/460V AC, 56C”
Related products
-
Definite Purpose Motors
50 Hz Motor: Totally Enclosed Fan-Cooled, 1/3 HP, 1,425 Nameplate RPM, 220/380/440V AC
Definite Purpose Motors50 Hz Motor: Totally Enclosed Fan-Cooled, 1/3 HP, 1,425 Nameplate RPM, 220/380/440V AC
Three-phase 50 Hz AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase 50 Hz motors of the same HP, rpm, and frame size.
SKU: 114889 -
Hazardous Location DC Motors
Hazardous Location Motor: 1/2 HP, 1,750 Nameplate RPM, 56C Frame, Face/Base Mounting
Hazardous Location DC MotorsHazardous Location Motor: 1/2 HP, 1,750 Nameplate RPM, 56C Frame, Face/Base Mounting
Class 1 C,D /2 F,G hazardous location DC motors are for use in atmospheres with a high presence of substances such as ethylene, gasoline, and ethanol. They are suitable for use in areas where dust from materials such as coal, grain, and flour may be present. Motors come with sturdy enclosures having thicker walls and longer flanges where the end bells and the frame meet. They have field wiring that must be completed in a separate or attached wiring compartment that has the same hazardous location class and group standards as the motor.
SKU: 118016
There are no reviews yet.