Item : | General Purpose Motor |
Motor Application : | General Application |
Motor Sub Application : | Carbonator Pump |
Phase : | Three |
Motor Design : | 3-Phase |
HP : | 1 1/2 |
Nameplate RPM : | 3,450 |
No. of Speeds : | 1 |
Voltage : | 208-230/460V AC |
Full Load Amps : | 4.7-4.4 |
Frame : | 56HC |
Usable @ 208V : | Yes |
Usable @ 200V : | No |
Hz : | 60 |
Motor Service Factor : | 1.15 |
Max. Ambient Temp. : | 40 Degrees C |
Duty Cycle : | Continuous |
Ins. Class : | F |
NEMA Design : | B |
Motor Enclosure Design : | Open Air-Over |
Motor Shaft Rotation : | CW/CCW |
Motor Mounting Type : | Rigid Base |
Motor Mounting Position : | All Angle |
Inverter Rated : | Yes |
Motor Shaft Design : | Keyed |
Removable Base : | Permanently Lubricated Bearings |
Motor Frame Material : | Steel |
Shaft Dia. : | 5/8 in |
Shaft Length : | 2 in |
Motor Bearings : | Ball |
Weight : | 32 lb |
Motor Efficiency Group : | NEMA Premium Efficient |
Nominal Efficiency : | 84 % |
CC Number : | CC030A |
Standards : | CSA, UL |
Manufacturers Warranty Length : | 2 yr |
Green Certification or Other Recognition : | NEMA Premium(R) Rated |
General Purpose Motor: Open Air-Over, Rigid Base Mount, 1 1/2 HP, 3,450 Nameplate RPM
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$261.07
There are no reviews yet.