Hazardous Location Motor: 1 C,D / 2 E,F,G, 3/4 HP, 1,800 Nameplate RPM, 115/208-230V AC
Class 1 C, D/2 E, F, G single-phase hazardous location AC motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also for use in areas where combustible metal dusts such as magnesium, and other combustible dusts such as carbon black, coke, charcoal, flour, starch, or grain dust are present.
$567.43
| Item : | Hazardous Location Motor |
| Motor Application : | Hazardous Location |
| Phase : | Single |
| Motor Design : | Capacitor-Start |
| HP : | 3/4 |
| Nameplate RPM : | 1,800 |
| No. of Speeds : | 1 |
| Voltage : | 115/208-230V AC |
| Full Load Amps : | 12.6/6.3 |
| Frame : | 56C |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60 |
| Max. Ambient Temp. : | 40 Degrees C |
| Motor Service Factor : | 1 |
| Motor Thermal Protection : | Auto |
| Ins. Class : | B |
| Hazardous Location Class : | 1 C,D / 2 E,F,G |
| Temp. Code : | T3C |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Duty Cycle : | Continuous |
| Motor Mounting Type : | Face |
| Motor Shaft Rotation : | CW/CCW |
| Hazardous Location Division : | Division 1 |
| Motor Mounting Position : | Horizontal |
| Lead Length : | 24 in |
| Length Less Shaft : | 12 3/16 in |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 1/16 in |
| Motor Shaft Design : | Keyed |
| Conduit Box Location : | Exterior |
| Includes : | Conduit Box |
| Motor Bearings : | Ball |
| Overall Length : | 14 1/4 in |
| Weight : | 1,005 lb |
| Motor Efficiency Group : | Standard Efficient |
| Nominal Efficiency : | 72.2 % |
| CC Number : | CC030A |
| Standards : | CSA Certified, UL Listed |
Based on 0 reviews
Be the first to review “Hazardous Location Motor: 1 C,D / 2 E,F,G, 3/4 HP, 1,800 Nameplate RPM, 115/208-230V AC”
Related products
-
Farm Duty AC Motors
High Torque Farm Duty Motor: 3/4, 1,725, 115/230V AC, 56, Manual, Keyed
High torque farm-duty AC motors can power conveyors, silo unloaders, barn cleaners, compressors, and manure pumps under heavy load conditions. Motors have enclosures that help protect them from moisture, but they are not airtight or waterproof.
SKU: FD34CM2P -
Definite Purpose Motors
Brake Motor: Totally Enclosed Fan-Cooled, 1 HP, 1,800 Nameplate RPM, 208-230/460V AC
Definite Purpose MotorsBrake Motor: Totally Enclosed Fan-Cooled, 1 HP, 1,800 Nameplate RPM, 208-230/460V AC
Three-phase brake AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They require no capacitor, start winding, centrifugal switch, or other starting device that can wear out and fail. They are for use in applications that require rapid stopping and holding action.
SKU: BMU1P2D -
General Purpose AC Motors
General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
General Purpose AC MotorsGeneral Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 1 HP, 143T Frame
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: U1P2D -
General Purpose AC Motors
Motor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
General Purpose AC MotorsMotor,3PH,3/4HP,1800,575V: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: T34S2G
There are no reviews yet.