General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP
NEMA 56 frame three-phase general purpose AC motors have a standard 5/8″ diameter, 1-7/8″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter ?H? indicates that the frame has a set of mounting holes at 3″ and 5″, ?Z? indicates that the frame has a nonstandard shaft, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
$416.94
| Item : | General Purpose Motor |
| Motor Application : | General Application |
| Phase : | Three |
| Motor Design : | 3-Phase |
| HP : | 3/4 |
| Nameplate RPM : | 3,450 |
| No. of Speeds : | 1 |
| Voltage : | 208-230/460V AC |
| Full Load Amps : | 3.2-3.0/1.60 |
| Frame : | 56C |
| Usable @ 208V : | Yes |
| Usable @ 200V : | No |
| Hz : | 60/50 |
| Motor Service Factor : | 1.15 |
| Max. Ambient Temp. : | 40 Degrees C |
| Duty Cycle : | Continuous |
| Ins. Class : | F |
| NEMA Design : | B |
| Motor Enclosure Design : | Totally Enclosed Fan-Cooled |
| Motor Shaft Rotation : | CW/CCW |
| Motor Mounting Type : | Face/Base |
| Motor Mounting Position : | All Angle |
| Motor Shaft Design : | Keyed |
| Motor Frame Material : | Steel |
| Shaft Dia. : | 5/8 in |
| Shaft Length : | 2 1/16 in |
| Motor Bearings : | Ball |
| Length Less Shaft : | 9 3/4 in |
| Overall Length : | 11 13/16 in |
| Weight : | 23 lb |
| Motor Efficiency Group : | Standard Efficient |
| Nominal Efficiency : | 74 % |
| Standards : | CE, CSA, UL Recognized |
| Manufacturers Warranty Length : | 1 yr |
| Full Load Amps @ 50Hz : | 3.2-3.0/1.60 |
| HP @ 50Hz : | 3/4 |
Based on 0 reviews
Be the first to review “General Purpose Motor: Totally Enclosed Fan-Cooled, Rigid Base Mount, 3/4 HP”
Related products
-
Pump AC Motors
Carbonator Pump Motor: Cradle Base Mounting, 1/3 HP, 1,725 Nameplate RPM, 115V AC
Split-phase carbonator pump AC motors are single phase with a lower starting torque for softer startup where the pump must gradually come up to speed after startup. They have an open dripproof (ODP) enclosure with ventilation openings in the endshields and shell positioned so that drops of liquid falling within 15? from vertical will not affect motor performance.
SKU: 5KH32ENA443X -
Hazardous Location AC Motors
Hazardous Location Motor: 1 C,D / 2 F,G, 1 HP, 1,725 Nameplate RPM, 575V AC, Auto
Hazardous Location AC MotorsHazardous Location Motor: 1 C,D / 2 F,G, 1 HP, 1,725 Nameplate RPM, 575V AC, Auto
Class 1 C, D / 2 F, G three-phase hazardous location AC motors don’t require starting capacitors, run capacitors, or centrifugal starting switches that can wear out and fail. They operate with a higher torque and greater efficiency than single-phase hazardous location motors of the same HP, rpm, and frame size. These motors are for use in environments where flammable gas or vapor such as ethylene, propane, or methane are present. They are also used in areas where combustible dust such as carbon black, coke, charcoal, flour, starch, or grain dust is present.
SKU: 056T17G15615 -
Pump AC Motors
Fire Pump Motor: 300 HP, 1,780 Nameplate RPM, 460V AC, 447TS Frame
Three-phase fire pump AC motors are highly efficient with a high starting torque compared to single-phase models of the same HP, rpm, and frame size. They operate without start or run capacitors that can wear out and fail.
SKU: 447TSTDN7026 -
General Purpose AC Motors
General Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
General Purpose AC MotorsGeneral Purpose Motor: Open Dripproof, Rigid Base Mount, 1 HP, 1,760 Nameplate RPM
NEMA 140 frame three-phase general purpose AC motors have a standard 7/8″ diameter, 2-1/4″ length shaft whose center is 3-1/2″ above the base mounting surface. Variations to the frame’s standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter ?T? specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and ?C? indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).
SKU: 143TTDR16056
There are no reviews yet.